Capacity: 1t/2t/3t/5t
1. Overview
OCS/HYCS series crane scales consist of hanging parts,high precision load cell , A/D converter and display specially developed for the crane scales.The OCS-ZS uses 5-bit 1.2-inch LED display, the OCS-ZSH use 5-bit 1.2-inch LCD display, the HYCS-E1/E2 use 5-bit 1-inch LED display, and HYCS-H2 use 5-bit 1-inch LCD display, which is clear and bright and can clearly read at a distance.Due to the use of unique anti-jitter, vibration, swing intelligent digital filter, reading stability is good, stability time is short (< 5 seconds).It has the function of instant peeling and delay peeling.With automatic accumulation function.The low power consumption design makes the battery last longer, and also has the battery overdischarge protection circuit, which avoids the damage of the battery and the shortened service life caused by the overdischarge of the battery. Automatic power saving and automatic shutdown function, so that the battery life longer. When starting and shutting down, the battery power display (percentage display) enables you to timely know the battery power, so as to choose the right time to charge.
2. The power ON/OFF
1,Power
in the off state, press the [ tare, ON / OFF] key
turned on, it will displays the software version number: the 〖Uer5.2〗 seconds after the instrument: [999999] - [000000] self-test
. zero-bit initialization. The normal display: 〖0〗
2, panel buttons:
The button: [tare, ON / OFF] key; other
button: [Query] key.
3, while the power, press and hold the
[tare, ON / OFF] key, five seconds later the
battery power: [Pbt85〗 Then release it, automatically cut off power, or delay to Paper process, once again press
[tare, ON / OFF] key
will cut off the power.
Or press [B]+[A]key together by remote controller, it will cut off the power.
★ Note: Pbt85 the battery power for 85%;
3. Tare
1,
instant tare: the state of light goes out,
place heavy objects lifted until the weighing
stability, press [tare, ON / OFF] key or [C] by remote controller.
★ Note: weighing stability,
〖stability〗 indicator light.
2, the delay tare: Press and hold【tare, ON / OFF】 key 3 seconds after the display:
〖TArE-9〗,
then release it,it will display the
value of minus one per second speed display
〖TarE-x〗 At this point, to lift heavy objects. When
the display 〖TarE-0〗, peeled automatically. If the
weighing is also
not stable, the
display 〖UUUUU〗, waiting for the weighing stability automatically
peeled, the displayed value to zero, and [tare〗 indicator is lit.
4. Peak Hold
Press the remote controller B key, the display value is maintained, and then press the B key to be lifted.
5. Cumulative
Press [Query] button for 3 seconds, display [AUt-0].
Press[B] key by remote control ,display [AUt-1], Press [Query] bttonon to confirm, system automatic opening function cumulative. ("AUt-0" close cumulative function, "AUt-1" open cumulative function).
Note: Automatically accumulated, each weighing finish, showing value to zero, the display weight automatically accumulated, it will close automatically function after shutting down every time.
.
6. Query
The function can query the accumulated weight and overload record
"DAE-1": representing the latest 10 weighing data query
"DAE-2": represents the cumulative weight query
"DAE-3": query overload record
Short press [Query] button, display [DAE-0], enter the query function, press the [B] dey by remote controller and modify [DAE-1], press [A] by remote controller to confirm to enter the last 10 weighing data query. Press the [B] key to read data.
Press the [A] button to return "DAE-1" state, press [B] and modify [DAE-2]. Press [A] key to confirm to enter the query cumulative weight and cumulative number of times; at this time it display [C XXX], press the [B] button to read query data,
For example: 800kg weight is continuous weighing 32 times, the total weight is 25600kg, hanging display:
"C 32", "H0002", "L5600"
Note: C is the total number of times, H is the high 4 digits of total amount, L is the low 4 digits of total amount.
Press the [A] button to return "DAE-2" state, press the [B ] key and modify [DAE-3]. Press [A] button to confirm to enter the overload record query, it display overload of the times. Such as hanging without overload record, is shown as 0.
Press [A ]to return to the "DAE-3" state, press the [B] key to modify the [DAE-0], and then press the [A] to confirm and return the weighing state.
Remote control key instructions
A: Query key / Number reduce 1
B: Hold key / Cursor right
C: Tare key / Number add 1
D: Function / Confirmation
B+A: Shutdown key
Model
|
Max Cap.(Kg)
|
Min. Weigh (Kg)
|
Division (Kg)
|
Total Display Counts (N)
|
OCS-ZSH -1
|
1000
|
10
|
0.5
|
2000
|
OCS-ZSH -2
|
2000
|
20
|
0.5
|
2000
|
OCS-ZSH -3
|
3000
|
20
|
1
|
3000
|
OCS-ZSH -5
|
5000
|
40
|
1
|
2500
|
OCS-ZSH -10
|
10000
|
100
|
2
|
2000
|
Contact: Terence
Phone: 0086-18969804310
Tel: 0086-574-86141701
Email: sales@yahengchina.com
Add: 4th Floor No.6,Lane 136,Canglongshan Road,Daqi Sub-district,Beilun District,Ningbo City,China