|
HY-D201 / D201-A Control Indicator
Collect
1. Model： HY-D201 / D201-A control indicator-Waterprooftype
2. Accuracy: GradeⅢ, n=3000
3. Sample Rate： 80 times / second
4. Load cell sensitivity： 1.5～3mV / V (Dual optional)
5. Scale interval： 1/2/5/10/20/50 for option
6. Display： 6 bits LED，6 state indicating signals
7. Scoreboard interface： Serial output mode：RS232,(Dual optional)
transmission distance≤30m，
8. Communication interface：RS232C(Dual optional)；
Baud rate 1200/2400/4800/9600 optional
RS485(Optional),
Wireless communication(Optional),
9. Power supply: AC110V~240V;
10. Operating temperature/humidity: 0～40℃；≤90%RH
11. transporting temperature: -20～50℃
12.Dimention: (Panel)240(length)*122(width)*68(height)mm (trepanning)200*122mm Key functions [#]Press this button while open ,it will enter to calibrate mode. [Func ]Keep pressing this button for 5 seconds more in weighing mode, it will come into
operator setting mode; [Zero ]Press this button to zero in weighing mode. [Tare ]Press this button to tare in weighing mode. [ ] Press this button to start the indicator when it is off; and press it to shut off upon on.
Or Cancel this function change Settings.
Remark:
Press [#] and [FUNC] together in weighing mode,the LED of “LINK” will bright,and it will show the raw data signal from the load cell for check; Press them again,it will return to normal weighting. |
